Choosing the right forklift starts with the application, not simply the rated capacity or purchase price. Load dimensions, lift height, aisle space, operating hours and working conditions can all affect which forklift configuration is suitable for the job.

This forklift buying guide covers the key factors buyers should confirm before comparing models or requesting a quotation.

1. Determine the Required Load Capacity

Rated capacity is an important starting point, but it should not be considered alone.

Before selecting a forklift, confirm the maximum load weight as well as the dimensions of the load. Two loads of the same weight can place different demands on a forklift if their load centers are different.

For example, a 3,000 kg forklift is rated under specified load-center and lift conditions. A longer load moves the center of gravity forward and may reduce the capacity available for safe handling. Higher lift heights and certain attachments can also affect residual capacity.

When defining your requirements, provide:

Maximum load weight
Load or pallet dimensions
Typical load center
Maximum lift height
Required attachments

This gives the supplier more useful information than capacity alone and allows the truck configuration to be evaluated against the actual load.

2. Choose the Right Forklift Type and Power System

The forklift type should match where and how the equipment will be used.

Electric forklifts are commonly selected for warehouses, factories and logistics facilities where low noise and zero tailpipe emissions during operation are important. Battery capacity and charging arrangements should be matched to daily operating hours and shift patterns.

Diesel forklifts are widely used for outdoor yards, construction-related applications and other demanding environments where fuel availability and continuous operation may be important.

When comparing an electric vs. diesel forklift, consider:

Factor	Electric	Diesel
Typical environment	Indoor / mixed use	Outdoor / demanding use
Tailpipe emissions	None during operation	Yes
Noise	Lower	Higher
Energy supply	Charging required	Fuel required
Daily operation	Depends on battery and charging plan	Depends on fuel and maintenance plan
Maintenance	Fewer engine-related service items	Engine maintenance required

For warehouse applications with restricted space, equipment such as pallet trucks, stackers or reach trucks may also be more appropriate than a conventional counterbalance forklift.

The decision should therefore be based on the application rather than power type alone.

3. Check Lift Height and Mast Requirements

Maximum lift height is only one part of mast selection.

Buyers should confirm three measurements:

Maximum lift height — the highest level at which the load needs to be placed.

Lowered mast height — important when the forklift needs to travel through doorways or other areas with limited overhead clearance.

Free lift — the distance the forks can rise before the mast extends beyond its lowered height.

Mast configuration also matters. Two-stage and three-stage masts offer different combinations of lift height, closed height and free lift.

For example, if your operation requires a 4.5 m lift height but the forklift must also pass through a low doorway, specifying only “4.5 m lift height” is not enough. Both dimensions should be provided when selecting the mast.

This is particularly important when comparing forklift max height or 3-stage forklift mast height specifications between different models.

4. Check Aisle Width and Working Space

A forklift can meet the required capacity and lift height but still be unsuitable for a warehouse if there is not enough room to maneuver.

The minimum aisle width for a forklift depends on more than the overall width of the truck. A proper assessment should also consider:

Turning radius
Truck dimensions
Fork and load length
Pallet dimensions
Required clearance
Stacking direction

For warehouse operations, the right-angle stacking aisle width, often shown as Ast in technical specifications, is useful when comparing equipment for pallet stacking.

This is why a forklift aisle width calculation should use the actual pallet and load dimensions rather than truck dimensions alone.

If space is limited, provide the supplier with the narrowest working aisle and typical pallet dimensions. This can help determine whether a counterbalance forklift, reach truck or other warehouse equipment is more suitable.

5. Consider Attachments and Operating Conditions

Attachments should be confirmed before the final forklift configuration is selected.

Common options include side shifters, fork positioners, clamps and specialized forks. Because an attachment adds weight and can change the effective load center, it may also affect the forklift's available capacity.

The operating environment matters as well.

Consider whether the truck will work on:

Smooth warehouse floors
Outdoor concrete yards
Uneven surfaces
Ramps or gradients
Wet or dusty areas
Mixed indoor and outdoor routes

These conditions can influence tire selection, ground clearance and other configuration requirements.

A forklift should therefore be specified as a complete working system — truck, mast, forks, attachments and operating environment — rather than as an isolated capacity rating.

6. Compare Total Cost of Ownership and After-Sales Support

Purchase price is only one part of the cost of operating a forklift.

When comparing quotations, consider total cost of ownership (TCO), including:

Purchase price + energy or fuel + maintenance + parts + battery-related costs + downtime

For electric forklifts, battery capacity, charger configuration and charging strategy should be evaluated together with the truck. For diesel forklifts, fuel consumption and engine maintenance become important operating-cost factors.

After-sales support also affects long-term equipment availability.

Before purchasing, check:

Warranty coverage
Spare-parts availability
Technical support
Maintenance requirements
Service response process

A small difference in initial price may be less important if one configuration provides better uptime, easier parts access or lower operating costs over its service life.

For international buyers, local parts and service capabilities should therefore be considered alongside the equipment specification.

7. Prepare the Right Information Before Requesting a Quote

A clear RFQ helps the supplier recommend the correct forklift configuration and makes quotations easier to compare.

Before requesting a quote, prepare the following information:

Requirement	Information to Provide
Load capacity	Maximum load weight
Load dimensions	Length × width
Lift height	Maximum required height
Application	Warehouse, factory, yard, logistics, etc.
Operating environment	Indoor / outdoor / mixed
Working hours	Hours per day or number of shifts
Aisle width	Narrowest working aisle, if applicable
Attachments	Side shift, fork positioner, clamp, etc.
Quantity	Number of forklifts required
Destination	Country / city

If some specifications have not yet been determined, provide the load and application details first. These give the supplier a practical basis for recommending a suitable configuration.

Choosing a Forklift Around the Application

The right forklift is not determined by tonnage alone. Load dimensions, load center, lift height, mast configuration, aisle space, power system and operating conditions should all be considered before selecting a model.

A well-defined application also makes it easier to compare quotations on the same basis — instead of comparing two forklifts that may have different configurations.

NEARSUN provides electric forklifts, diesel forklifts and warehouse material handling equipment for a range of industrial applications. If you are selecting equipment for a specific operation, send us your load capacity, lift height, application, quantity and destination to discuss a suitable configuration.

Specification	CPD35-L View Products
Rated Capacity	3500 kg
Drive Type	Lithium Battery
Battery Capacity	80/230 V/Ah
Service Weight	4620 kg
Lift Height	3000 mm
Height of Overhead Guard	2210 mm
Turning Radius	2375 mm
Fork Dimensions	50x122x1070 s/e/l（mm）
Travel Speed, Laden/Unladen	14/15 km/h
Tire Type	Pneumatic Tire
Overall Width	1240 mm
Overall Length（with fork）	3755 mm
Free Lift Height	165 mm
Battery Weight	350 kg
Wheelbase	1750 mm

CPD35-L